Search for product

Products by ranges


Drainage and wastewater pumps > Vigila SS

Vigila SS

Vigila SS
Click on the photo to enlarge it

Very sturdy submersible pumps made from stainless steel for drainage, removal of clean water, infiltration water; emptying ponds, swimming pools and tanks and, in permanent installations, for preventing flooding in basements.

Their sturdiness has been specially designed for use in transferring water between tanks and cisterns, for emergency emptying of drains, garages and flooded basements and in severe applications with water that is not excessively loaded.

They include a silicon carbide and aluminium oxide mechanical seal for optimum watertightness.

It is supplied with 10 m of electric cable with a plug and a level switch to automate its operation depending on the water level.

They allow the passage of solid particles of up to 8 mm, which improves their usefulness and allows smooth operation. Its motor is cooled by the delivery water.

They have a 1 1/4" BSP female outlet.

Vigila SS Click on the image to download the pdf of the dimensions


Vigila SS Click on the image to download the pdf of the spare parts

Frequency and units







Operating curves

Click on the product name to see each model’s specific features
Series features Vigila SS:
  • Equipment
  • Check valve: No
  • Draining plug: No
  • Fittings: Screw
  • Handle: Included
  • Pre-filter: Included
  • Support base: Included
  • Electrical characteristics
  • Electrical isolation: F Class
  • Motor speed operation: Constantly speed
  • Motor type: Asynchronous
  • Protection rating: IP68
  • Reset: Automatic
  • Service factor: S1
  • Service type: Continuous
  • Manufacturing characteristics
  • Discharge connection type: Nut
  • Discharge diameter: 1 1/4" G
  • Motor cooling: Water
  • Solid passage (mm): 8
  • Stages: Single-Stage Centrifugal Pump
  • Tightness by: Mechanical Seal
  • Materials
  • Discharge body: Stainless steel AISI 304
  • Gaskets: NBR
  • Impeller/s: Rubber TPU 65Sh Reinforced by bi-chrome iron
  • Mechanical seal: Aluminium-Silicon Carbide
  • Mechanical seal bracket: PP + 30% FV
  • Motor casing: Stainless steel AISI 304
  • Nuts and bolts: Stainless steel AISI 304
  • Outer pump body: Stainless steel AISI 304
  • Pre-filter: Stainless steel AISI 304
  • Pump shaft: Stainless Steel AISI 420
  • Suction body: PP + 30% GF
  • Support base material: PP + 30% GF
  • Usage limits
  • Liquid temperature (ºC): Min: 4 - Max: 35
  • Maximum no. of motor start-ups (start-ups/minute): 0,50
  • Maximum submersion (m): 10
  • Maximum working pressure (bar): 6
Name Language Format Size Download Favourite
Technical appendix Spanish .pdf 1.48 Mb f
Safety recommendations for submersible pumps .pdf 421.37 Kb f
Vigila SS instruction manual .pdf 543.70 Kb f
Vigila SS spare parts .pdf 495.34 Kb f
Vigila SS dimensions .pdf 46.38 Kb f
Product portfolio .pdf 2.22 Mb f

© 2019 ESPA Oficinas Centrales / ESPA Headquarters

Ctra de Mieres, s/n GPS: N42° 06' 37'' / E02° 45' 03'' 17820 Banyoles Spain Tel.+34 972 588 000