ESPA 55 - Since 1962
Search for product
  f

Products in alphabetical order

Acuaria 17
Click on the photo to enlarge it

Integral, multi-stage, submersible, centrifugal electric pumps for wells from 6” or open wells.

These have been designed for supplying clean water to homes, small farms, sprinkler irrigation systems and pressurisation equipment. All parts in contact with water are made of AISI 304 stainless steel, except for the spray nozzles, which are made of thermoplastic.

The selected materials guarantee proven reliability and durability with drinking water.

The motor is manufactured such as to allow effective cooling in the whole range of pumping flows, thanks to its double inner jacket and the special way the top sealing body and the double mechanical closure are achieved. The compact design of the pump allows effective cooling of the motor even if it is installed in open wells, tanks or ponds; it has also been designed so that its suction via the bottom enables better exhaustion of the suction tank.

In drilling installations it allows the exploited dynamic level to be increased.

 
Acuaria 17 Click on the photo to enlarge it

 

Acuaria 17 Click on the image to download the pdf of the spare parts

Frequency and units

Flow:

Pressure:

Power:

NPSH:

 

 

Operating curves
 

Click on the product name to see each model’s specific features
Series features Acuaria 17:
  • Equipment
  • Check valve: No
  • Draining plug: No
  • Fittings: Not included
  • Pre-filter: Included
  • Electrical characteristics
  • Electrical isolation: F Class
  • Motor speed operation: Constantly speed
  • Motor type: Asynchronous
  • Protection rating: IP68
  • Reset: Automatic
  • Service factor: S1
  • Service type: Continuous
  • Manufacturing characteristics
  • Discharge connection type: Nut
  • Discharge diameter: 1" G
  • Impeller type: Closed
  • Minimum well diameter: 140 mm
  • Motor cooling: Water
  • Solid passage (mm): 2
  • Stages: Multi stage centrifugal pump
  • Tightness by: Double Mechanical Seal
  • Materials
  • Diffuser: PPO + 30% GF
  • Discharge body: Stainless steel AISI 304
  • Gaskets: NBR
  • Impeller/s: Stainless steel AISI 304
  • Mechanical seal: Aluminium- Graphite/ Graphite- Steatite
  • Mechanical seal bracket: Stainless steel AISI 304
  • Motor casing: Stainless steel AISI 304
  • Motor shaft: F114
  • Nuts and bolts: Stainless steel AISI 304
  • Outer pump body: Stainless steel AISI 304
  • Pre-filter: Stainless steel AISI 304
  • Pump shaft: AISI 431
  • Suction body: Stainless steel AISI 304
  • Usage limits
  • Liquid temperature (ºC): Min: 4 - Max: 35
  • Maximum no. of motor start-ups (start-ups/minute): 0,50
  • Maximum submersion (m): 50
  • Maximum working pressure (bar): 12
Name Language Format Size Download Favourite
Acuaria 17 dimensions Spanish .pdf 29.09 Kb f
Technical appendix Spanish .pdf 1.48 Mb f
Acuaria 17 instruction manual .pdf 1.88 Mb f
Product portfolio .pdf 2.22 Mb f
Acuaria 17 spare parts .pdf 47.88 Kb f
Safety recommendations for submersible pumps .pdf 421.37 Kb f

News

more news
 

Warranty extension form

(Fields marked with * are required)

Product information


Personal information


Vendor information

Captcha image
Write the 5 characters in the image

  I would like to receive news from ESPA.

  *I accept the data of legal notice about this website

 
 

© 2017 ESPA Oficinas Centrales / ESPA Headquarters

Ctra de Mieres, s/n GPS: N42° 06' 37'' / E02° 45' 03'' 17820 Banyoles Spain Tel.+34 972 588 000 info@espa.com